Product Description

1947 – 1954 Chevrolet Pickup Truck vent window rubbers (Australian body)

These reproduction 1947 – 1954 Chevrolet Pickup Truck vent window rubbers (Australian body) will allow you to replace your dried, hard original quarter vent seals. Unlike some others available that are a universal fit, these are a proper moulded rubber. These seals are made specifically for the Australian Chevrolet Pickup Trucks.

PLEASE NOTE All the glass and associated rubbers and seals in these vehicles are different to their American bodied Chevy counterparts (even though they do look similar).

In order to replace the vent window rubbers, you will need to drill out the stainless pivot pin/rivet in the top hinge, a new one is supplied in this kit. The original vertical seals had a metal backing moulded into it with small tabs that folded over into the post. That exact style is not available, however the extrusion we provide works well. You simply trim it to length and it can be glued in place with Sikaflex or similar.
Please note: These vent rubbers are made from a couple of different extrusions so you will see a few joins in the seals if you look very closely, this does not affect the fit/finish or seal. 

1947 – 1954 Chevrolet Pickup Truck vent window rubbers (Australian body) includes:

2 x Vent window seals (L shape)
2 x Vertical seals
2x Stainless steel pivot rivets and fibre washer to suit. 
(Chrome frame, glass etc NOT included)

1947 -1954 Chevrolet Pickup Product links 

Windscreens
Back Glass
Side Glass
Rubbers and Seals

 Fits the following models: (We may not have them all listed, but it does fit every Australian Holden produced truck body from 47 through to 54.)
Within the range below, we may not have listed everything. They were often referred to by the 3300, 4400, 1 Tonne, 1.5 Tonne and 3 Tonne load rating. 

1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, Chevrolet pickup truck

 

Auto safety glass needs to be legally compliant. All glass supplied by Glass 4 Classics meets the requirements of Australian Design Rule ADR 8/01 and complies with Australian Standard AS/NZS2080:2006, or the equivalent International Standard. Each piece of glass will have a ‘compliance mark’, also known as a bug, logo, glass monogram or safety stamp.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pin It on Pinterest

Share This