1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) | New Glass

Original price was: $429.00.Current price is: $386.10. inc. GST

This 1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) includes the following:

1 x Left front windscreen 6.1mm thick laminated glass
1 x Right front windscreen 6.1mm thick laminated glass

1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) | New Glass

This 1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) will allow you to upgrade your pickup’s front glass. This custom V-butt design offers a modern one-piece front glass solution for a seamless upgrade.

Say goodbye to the standard windscreens and opt for this one-piece glass design, that not only enhances the appearance, but also makes installation a breeze. With a clean joint and a thickness of 6.1mm, these laminated glass windscreens are fully compliant and offer a fantastic alternative to the original ones. Don’t miss out on this opportunity to give your vehicle a fresh new look!

Please note: This is not a one piece window, it is made up of two halves. You will need to remove the centre bar that is used to hold the centre rubber/trim (there should only be two screws holding this in place). This installation is very straight forward and will utilise a standard front windscreen rubber. Full installation instructions will be supplied with the screen.

Also Available:
1947-1954 Chevrolet Pickup Truck | Windscreens
1947-1954 Chevrolet Pickup Truck | Back Window
1947-1954 Chevrolet Pickup Truck | Side Glass
Rubbers, Seals, Door Belts, Bailey Channels

Note about Images:
The images shown represent the shape of the glass only and may not be an accurate representation of size, proportion, or clarity.

Glass 4 Classics is committed to delivering products that not only fit well but also meet the highest standards of quality. Shop with us and experience the difference!

Auto safety glass needs to be legally compliant. All glass supplied by Glass 4 Classics meets the requirements of Australian Design Rule ADR 8/01 and complies with Australian Standard AS/NZS2080:2006, or the equivalent International Standard. Each piece of glass will have a compliance mark, also known as a bug, logo, glass monogram or safety stamp.

Weight	10 kg
Dimensions	82 × 62 × 12 cm
Windscreen Colour	Laminated Clear, Laminated Green Tint

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Fits the following models: (We may not have them all listed, but it does fit every Australian Holden produced truck body from 47 through to 54.) Within the range below, we may not have listed everything. They were often referred to by the 1 Tonne, 1.5 Tonne and 3 Tonne load rating. - 1947 Chevrolet pickup truck - Commercial 1130 Series - 1947 Chevrolet pickup truck - Commercial 1140 Series - 1947 Chevrolet pickup truck - Commercial 1420 Series - 1948 Chevrolet pickup truck - Commercial 1300 Series - 1948 Chevrolet pickup truck - Commercial 1420 Series - 1948 Chevrolet pickup truck - Commercial 1300 Series (Thriftmaster) - 1949 Chevrolet pickup truck - Commercial 1130 Series - 1949 Chevrolet pickup truck - Commercial 1670 Series - 1950 Chevrolet pickup truck - Commercial 1140 Series - 1950 Chevrolet pickup truck - Commercial 1670 Series - 1950 Chevrolet pickup truck - Commercial 1680 Series - 1951 Chevrolet pickup truck - Commercial 1130 Series - 1951 Chevrolet pickup truck - Commercial 1140 Series - 1951 Chevrolet pickup truck - Commercial 1670 Series - 1951 Chevrolet pickup truck - Commercial 1680 Series - 1952 Chevrolet pickup truck - Commercial 1130 Series - 1952 Chevrolet pickup truck - Commercial 1140 Series - 1952 Chevrolet pickup truck - Commercial 1420 Series - 1952 Chevrolet pickup truck - Commercial 1540 Series - 1952 Chevrolet pickup truck - Commercial 1550 Series - 1953 Chevrolet pickup truck - Commercial 1140 Series - 1953 Chevrolet pickup truck - Commercial 1420 Series - 1953 Chevrolet pickup truck - Commercial 1540 Series - 1954 Chevrolet pickup truck - Commercial

1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) | New Glass

This 1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) includes the following:

1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) | New Glass

This 1947-1954 Chevrolet Pickup Truck | Custom V-butt Windscreen (Australian body) will allow you to upgrade your pickup’s front glass. This custom V-butt design offers a modern one-piece front glass solution for a seamless upgrade.

Reviews

You may also like…

Related products